Call Us: 1-877-888-2678
Rebate Center
Help Desk
My Account
Exclusive Offers!
Follow Us:

TrippLite Metered PDU with Automatic Transfer Switching PDUMH20ATNET - power distribution unit - 2400 VA - PDUMH20ATNET

1U rackmount PDU with digital current monitoring display. 20A 120V capacity with 16 NEMA 5-15/20R outlets. Connects to NEMA 5-20R and locking L5-20R receptacle.   Learn more about the product
List Price :$865.80
You Save:$318 (37%)
Your Final Price:$547.99
Add Item
eCOST Part#: 7204108
Usually Ships:
Platform: Universal
Customer Rating:
No Reviews


"List price" is the suggested retail price provided to us by our vendors. We make no representation that a substantial number of these products have been sold or offered for sale at the list price. Actual retail prices in your area may be substantially different. Since we sell products on a national basis, it is not possible to know if our merchandise is sold at list price in any particular location or at any particular time. "You Save" reflects the difference between our price and the vendor provided list price shown on our sites. Since the list price may be different than the actual retail prices in your area, you may not actually realize a savings of this amount.

Manufacturers sometimes ask that retailers not display a price if it drops below a certain amount. The "Click here to see Lowest Price" message indicates that the price of the item is so low that the manufacturer requested that it not be advertised (that is, displayed). In a brick-and-mortar store, you would probably have to ask a salesperson what the price of the product is. At eCOST, by clicking on "Click here to see Lowest Price" you are essentially asking to see the price, at which point we show it to you.

 Free Shipping
 Free Shipping on Orders Over $50 and under 30 pounds (Orders Up to 30lbs qualify. Excludes shipments to AK & HI.)

Tripp Lite's 120V 20A metered PDU system with Automatic Transfer Switching (ATS) is a 16 outlet PDU with a digital display to indicate total PDU power consumption in amps. Outlets are sequentially turned-on at 250 millisecond intervals when the PDU is first energized from an unpowered state to prevent inrush-related equipment interaction on startup. Installed web/network monitoring card enables remote power monitoring and control. Remotely displays status of input power, load capacity, and outlet power status via secure network or web browswer interface. Offers individual outlet control to power on, off, or cycle AC output to regain control of locked-up servers and other network devices. Load ramping and shedding provides automatic power management. Supports notification and logging of input power status, event notification, output power and load conditions. Supports 1U rackmount installation in a 2 or 4 post racks. Included are 16 NEMA 5-15/20R outlets, and optional-use dual cords for auto- transfer switching (ATS) options. Each input plug supports 5-20P and L5-20P input.

Optional integrated ATS / Auto-Transfer Switch provides a redundant power option for networking and server applications with non-redundant internal power supplies. In ATS mode, the attached power cord serves as the PRIMARY input and the included detachable cable serves as the SECONDARY input to the ATS. The ATS will normally maintain continuous output to all outlets as derived from the primary input cable. If the primary power source becomes unstable or fails altogether in relation to the secondary, the ATS will switch over to the secondary power source until the primary input is restored and stable. ATS functionality is supported by any two 120V AC power sources, regardless of phase angle, to offer support for a variety of unique redundant power applications. Enables fault tolerant hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord is connected to a separate UPS system. In a two-UPS environment, the primary input cable must be supported by a full time sine wave UPS. Tripp Lite SmartOnline series is highly recommended for use as the primary UPS in a two-UPS application. ATS configurations utilizing separate mains circuits, backup generators and even separate utility power grid feeds are fully supported. On-board ATS processor constantly evaluates power quality on both input sources to prevent transfer to the secondary source when unavailable or of lower quality than the primary source. Front input LEDs display primary or secondary power availability.
  • 120V 20A metered PDU system with Automatic Transfer Switch (ATS)
  • Dual input input cords, one attached (primary) and one optional-use detachable cord (secondary)
  • Included cordsets support 5-20P and L5-20P plug-in connections via secure adapters
  • Front panel digital ammeter displays power consumption in amps
  • Web/Network monitoring card enables remote power monitoring and control of power to each outlet
  • 16 built-in NEMA 5-15/20R output receptacles
  • Optional ATS function enables setup for hot-swappable UPS maintenance bypass, dual UPS protection or dual AC input redundancy for critical single-corded network hardware (ATS function requires the use of a full time sine wave UPS, like Tripp Lite's SmartOnline series)
  • ATS functionality is supported by any two 120V AC power sources, regardless of phase angle, to offer support for a variety of unique redundant power applications
  • Small 1U rackmount format installs in only one rack space with a maximum installed depth of 14.5 inches
  • Also supports 0U vertical mounting in the cable managment area of many rack enclosures
  • Individually controlled outlets provide load management to networked equipment
  • Sequential outlet turn on eliminates power up in-rush of connected devices on initial start-up
  • Ideal for configurations requiring a simple PDU that displays power consumption in amps
  • Optional-use ATS function makes this system ideal for adding redundancy to single corded devices
  • ATS function adds hot-swap and maintenance bypass function to standard UPS configurations
Device Type Power distribution unit - rack-mountable
Height (Rack Units) 1U
Color Black
Power Device
Input Voltage AC 120 V
Frequency Required 50/60 Hz
Input Connector(s) 2 x power NEMA 5-20, power NEMA L5-20
Power Output Connectors Details 16 x power NEMA 5-15/20
Output Voltage AC 120 V ( 50/60 Hz )
Max Electric Current 20 A
Power Capacity 2400 VA
Remote Management Interface Ethernet 10/100
Remote Management Protocol SNMP, Telnet, HTTP
Expansion / Connectivity
Interfaces 1 x management - 9 pin D-Sub (DB-9) ¦ 1 x management - RJ-45 ¦ 1 x management - 8 pin mini-DIN ¦ 1 x management - 6 pin mini-DIN (PS/2 style)
Expansion Slot(s) 1 (total) / 0 (free) x expansion slot
Cables Included 1 x power cable - external - 12 ft ¦ 1 x power cable - integrated - 12 ft ¦ 2 x power connector adapter - external
Features Current meter, LED indicators, Automatic Transfer Switch (ATS)
Compliant Standards NOM, RoHS
Manufacturer Warranty
Service & Support 2 years warranty
Service & Support Details Limited warranty - 2 years
Environmental Parameters
Min Operating Temperature 32 °F
Max Operating Temperature 104 °F
Humidity Range Operating 0 - 95%
Dimensions & Weight
Width 17.5 in
Depth 14.5 in
Height 1.7 in
Weight 12.1 lbs
Dimensions & Weight (Shipping)
Shipping Width 22.5 in
Shipping Depth 23.5 in
Shipping Height 6.3 in
Shipping Weight 16.3 lbs
  View/Download Coupon

TrippLite Metered PDU with Automatic Transfer Switching PDUMH20ATNET - power distribution unit - 2400 VA (PDUMH20ATNET)

1U rackmount PDU with digital current monitoring display. 20A 120V capacity with 16 NEMA 5-15/20R outlets. Connects to NEMA 5-20R and locking L5-20R receptacle.

0 Question(s) • 0 Answer(s)

Back to top

Rules and Regulations

0 Question(s) from the Community

Most Recent Reviews

No reviews have been submitted for this product. Be the first user to  submit a review .
Entrust bbb Rating Tool Twist

1940 E. Mariposa Ave. El Segundo, CA 90245 - 877.888.2678
© 1999 – 2014 eCOST