Transition Fast Ethernet 100BASE-TX to 100BASE-FX Stand-Alone Media Converters -SC 20 Kilometers - E-100BTX-FX-05(S


Operates under heavy traffic loads without excess heat, so there is no need for a failure-prone internal fan.   Learn more about the product
Price:$449.99
Quantity:
Add Item
eCOST Part#: 576672
Mfr Part#: E-100BTX-FX-05(S
Usually Ships:
Availability:
Platform: Universal
Manufacturer:
UPC:648177006496
Customer Rating:
(0)
No Reviews

 

"List price" is the suggested retail price provided to us by our vendors. We make no representation that a substantial number of these products have been sold or offered for sale at the list price. Actual retail prices in your area may be substantially different. Since we sell products on a national basis, it is not possible to know if our merchandise is sold at list price in any particular location or at any particular time. "You Save" reflects the difference between our price and the vendor provided list price shown on our sites. Since the list price may be different than the actual retail prices in your area, you may not actually realize a savings of this amount.

Manufacturers sometimes ask that retailers not display a price if it drops below a certain amount. The "Click here to see Lowest Price" message indicates that the price of the item is so low that the manufacturer requested that it not be advertised (that is, displayed). In a brick-and-mortar store, you would probably have to ask a salesperson what the price of the product is. At eCOST, by clicking on "Click here to see Lowest Price" you are essentially asking to see the price, at which point we show it to you.

 Free Shipping
 Free Shipping on Orders Over $199 (Orders Up to 20lbs qualify. Excludes shipments to AK & HI.)
Extend Network Distance
Used in pairs, this media converter can extend distances between two twisted pair switches or a switch and a server up to 2 km over multimode fiber, or up to 120 km over single mode fiber.

Connect Remote Devices
Using one media converter, a switch with a copper port can be connected to a switch with an existing fiber interface.

Features:

– Extended temperature capable

– Round trip delay of only 40 bit times—far below the Class II rating of 92 bit times.

– Auto-Negotiation (802.3u)
Allows devices to perform automatic configuration to achieve the best possible mode of operation over a link.

– AutoCross™
Automatically detects and configures the twisted pair port on the converter to the correct MDI or MDI-X configuration.

– Link Pass Through
Link Pass Through is a troubleshooting feature that allows the media converter to monitor both the fiber and copper RX ports for loss of signal.

– Far End Fault (FEF)
A troubleshooting feature that is generally used in conjunction with Link Pass Through to notify both end devices of a loss of link.

– Automatic Link Restoration
Transition Networks's converters will automatically re-establish link in all network conditions.

– Pause (IEEE 802.3xy)
Pause signaling is an IEEE feature that temporarily suspends data transmission between two devices in the event that one of the devices becomes overwhelmed.

– The converters will also automatically re-establish link when connected to two 10/100 auto-negotiating switches if link is lost. With other manufacturers' converters the user must intervene to re-establish link.

Specifications:

– Standards
IEEE Std. 802.3™ 100BASE-FX, 100BASE-TX

– Ports
Port One: 100BASE-TX (RJ-45) [100 m/328 ft.]
Port Two: 100BASE-FX 1310nm single mode (SC) [20 km/12.4 miles]

– Fiber Optic Connector Specs (Singlemode)
Min TX PWR: -15 dBm
Max TX PWR: -8 dBm
RX Sensitivity: -31 dBm
Max In PWR: -8 dBm
Link Budget: 16.00 dB

– Switches
SW1: Auto-Negotiation On/Off
SW2: Pause TX On/Off
SW3: Link Pass Through On/Off
SW4: Far End Fault On/Off

– Jumper
J3: AutoCross™ enable/disable

– Status LEDs
Power: On = connection to external AC power
SDF or LKF (Signal Detect Fiber or Link Fiber): On = Fiber link detected
SDC or LKC (Signal Detect Copper or Link Copper): On = Copper link detected
RXF (Receive Fiber): Flashing = Signal being received on fiber link
RXC (Receive Copper): Flashing = Signal being received on copper link

– Power
External AC/DC required 12V DC, 0.5A
unregulated
standard

– Dimensions
Width: 3.0" (76 mm)
Depth: 4.7" (119 mm)
Height: 1.0" (25 mm)
Manufacturer Information
Parts Warranty Lifetime
Labor Warranty Lifetime
Warranty Details Limited Warranty
close
  View/Download Coupon
 

Transition Fast Ethernet 100BASE-TX to 100BASE-FX Stand-Alone Media Converters -SC 20 Kilometers (E-100BTX-FX-05(S )

Operates under heavy traffic loads without excess heat, so there is no need for a failure-prone internal fan.

0 Question(s) • 0 Answer(s)

Back to top

Rules and Regulations

0 Question(s) from the Community

Most Recent Reviews

No reviews have been submitted for this product. Be the first user to  submit a review .
 
Entrust bbb Rating Tool Twist

1940 E. Mariposa Ave. El Segundo, CA 90245 - 877.888.2678
© 1999 – 2012 eCOST