StarTech VGA Wall Plate Video Extender Receiver over Cat 5 - STUTPRXWAL


This VGA Video Receiver Wall Plate can be used with STUTP series of VGA over Cat5 extenders, allowing to make out-of-the-way connections from a VGA video source to a remote VGA monitor.   Learn more about the product
      
Price:$112.99
Quantity:
Add Item
eCOST Part#: 7867273
Mfr Part#: STUTPRXWAL
Usually Ships:
Availability:
Platform: Universal
Manufacturer:
UPC:749479013295
Customer Rating:
(0)
No Reviews

 

"List price" is the suggested retail price provided to us by our vendors. We make no representation that a substantial number of these products have been sold or offered for sale at the list price. Actual retail prices in your area may be substantially different. Since we sell products on a national basis, it is not possible to know if our merchandise is sold at list price in any particular location or at any particular time. "You Save" reflects the difference between our price and the vendor provided list price shown on our sites. Since the list price may be different than the actual retail prices in your area, you may not actually realize a savings of this amount.

Manufacturers sometimes ask that retailers not display a price if it drops below a certain amount. The "Click here to see Lowest Price" message indicates that the price of the item is so low that the manufacturer requested that it not be advertised (that is, displayed). In a brick-and-mortar store, you would probably have to ask a salesperson what the price of the product is. At eCOST, by clicking on "Click here to see Lowest Price" you are essentially asking to see the price, at which point we show it to you.

 Free Shipping on Orders Over $199 (Orders Up to 20lbs qualify. Excludes shipments to AK & HI.)

This VGA Video Receiver Wall Plate can be used with StarTech.com's STUTP series of VGA over Cat5 extenders, allowing you to make out-of-the-way connections from a VGA video source to a remote VGA monitor. The receiver wall plate can be placed in a wall or ceiling gang for a cleaner, more professional VGA installation, supporting a connection distance up to a maximum of 300m (950ft) from the transmitter unit (not included).

Offering maximum versatility and convenience, the VGA wall plate is easy to install; simply wallmount the receiver unit near the intended VGA monitor, then connect the receiver to the corresponding transmitter unit. The VGA transmitter and receiver units can then be linked using standard Cat5e or Cat6 cable, providing a high quality video extension while concealing the cable for neater installation.

The VGA receiver wall plate uses a 12V DC terminal block connector behind the unit that offers a clutter-free installation; using Cat5/Cat6 cable to extend the VGA signal offers a cost-effective solution based on the broad availability of networking cable which is far more flexible than VGA cable, not to mention less expensive.

Unlike some video extension systems, our VGA extender wall plates also allow you to make use of an existing networking cable (Cat5, Cat6) infrastructure, eliminating the need to re-run cable in the event of an upgrade from VGA to another video standard, by simply swapping out the wall plates.

Features:
  • Compatible with UTPE series 4 and 8 port VGA video extender (ST124UTPE and ST128UTPE). Also works with the wall plate VGA video extender transmitter (STUTPTXWAL).
  • Extend a VGA video signal to a maximum distance of 300m / 950ft. See specification for resolutions supported at various distances.
  • Integrators and installers now have the choice of bulk rolls for custom length on field termination or using set lengths for quicker installs.
  • Powering the STUTPRXWAL uses a terminal block for a more secure connection.
  • The STUTPRXWAL uses Cat5 cabling because it is lightweight, flexible, fits through small conduits.
  • Use existing in-wall Cat5 cabling and save time for installations. Simply plug in the Cat5 cable into the RJ-45 connector and the cable is locked in.
General
Device Type Video extender
Enclosure Type External
Width 4.1 in
Depth 1.7 in
Height 1.5 in
Weight 4.8 oz
Enclosure Color White
Networking
Connectivity Technology Wired
Max Resolution 1920 x 1200
Max Transfer Distance 980 ft
Expansion / Connectivity
Interfaces 1 x display / video - VGA output - 15 pin D-Sub (DB-15) female ¦ 1 x display / video - input - RJ-45 female
Miscellaneous
Compliant Standards FCC, RoHS
Manufacturer Warranty
Service & Support 1 year warranty
Service & Support Details Limited warranty - 1 year
close
  View/Download Coupon
 

StarTech VGA Wall Plate Video Extender Receiver over Cat 5 (STUTPRXWAL)

This VGA Video Receiver Wall Plate can be used with STUTP series of VGA over Cat5 extenders, allowing to make out-of-the-way connections from a VGA video source to a remote VGA monitor.

0 Question(s) • 0 Answer(s)

Back to top

Rules and Regulations

0 Question(s) from the Community

Most Recent Reviews

No reviews have been submitted for this product. Be the first user to  submit a review .
 
Entrust bbb Rating Tool Twist

1940 E. Mariposa Ave. El Segundo, CA 90245 - 877.888.2678
© 1999 – 2012 eCOST