Call Us: 1-877-888-2678
Rebate Center
Help Desk
My Account
Exclusive Offers!
Follow Us:

Paradyne SHDSL 4-Port Network Extender Kit - SNE2040G-KIT1US

Four Line Loop Bonding SHDSL Kit Includes (1) SNE2040G-P Provider Unit and (1) SNE2040G-S Subscriber Unit with North American Supply   Learn more about the product
Service Plan:
Add Item
eCOST Part#: 545933
Mfr Part#: SNE2040G-KIT1US
Usually Ships:
Platform: Universal
Customer Rating:
No Reviews


"List price" is the suggested retail price provided to us by our vendors. We make no representation that a substantial number of these products have been sold or offered for sale at the list price. Actual retail prices in your area may be substantially different. Since we sell products on a national basis, it is not possible to know if our merchandise is sold at list price in any particular location or at any particular time. "You Save" reflects the difference between our price and the vendor provided list price shown on our sites. Since the list price may be different than the actual retail prices in your area, you may not actually realize a savings of this amount.

Manufacturers sometimes ask that retailers not display a price if it drops below a certain amount. The "Click here to see Lowest Price" message indicates that the price of the item is so low that the manufacturer requested that it not be advertised (that is, displayed). In a brick-and-mortar store, you would probably have to ask a salesperson what the price of the product is. At eCOST, by clicking on "Click here to see Lowest Price" you are essentially asking to see the price, at which point we show it to you.

 Free Shipping
 Free Shipping on Orders Over $50 and under 30 pounds (Orders Up to 30lbs qualify. Excludes shipments to AK & HI.)
Paradyne's family of EFM Based Network Extenders provide an extremely flexible and easy to use solution for providing Ethernet based services to subscribers throughout the service providers network.

Paradyne's SNE2040G is a EFM Based loop bonding CPE for Paradyne's IP based 12000/4000 BLCs that provides up to 9.2 Mbps of symmetrical bandwidth using four copper pairs.

The SNE2040 features four SHDSL ports, each capable of up to 2.3 Mbps symmetrical bandwidth. When used with any of Paradyne's Ethernet Loop Bonding compatible products, one, two, three or four copper pairs may be used to deliver high-speed symmetrical bandwidth at any given distance. In addition, the SNE2040G can be used in a point-to-point configuration for high speed copper connections between two locations. Paradyne's loop bonded SHDSL provides automatic load balancing and fail-over to provide optimum redundancy and data throughput, all delivered using Paradyne's plug 'n' play architecture for cofiguration free deployment.

The SNE2040G-S is built on Paradyne's DSL the Easy Way™ architecture, providing plug 'n' play installation and completely removing configuration requirements, allowing this device to be installed quickly and easily at the customer premise. Like all of Paradyne EFM based products, the SNE2040G is Ethernet-based, allowing for optimum throughput and reliability.

– DSL the Easy Way™ Architecture delivers plug 'n' play Loop Bonded lines with NO configuration requirements
– Supports 8 selectable data rates up to 9.2 Mbps (symmetrical)plus rate adaptive mode option
– Configuration-free operation minimizes truck roll/engineering site visits
– Connects directly to any RJ45 10/100 Mbps Ethernet port on a PC or LAN
– Can be used with any loop bonding capable Net to Net Technologies IP DSLAM, or in point-to-point configurations
– Automatic load balancing and fail-over on bonded SHDSL ports for optimum throughput and redundancy


– 1.25" (3.2cm) High x 8.5" (21.6cm) Wide x 4.75" (12.1cm) Deep

– 100-125VAC @ 0.15A
– 200-240VAC @ 0.075A

– 4 x SHDSL Hybrid RJ11/RJ45 (TC-PAM encoding)
– 1 x 10/100 Ethernet RJ45

Standards Support
– IEEE 802.3 Ethernet
– ITU G.991.2 G.SHDSL

Protocol Support
– Transparent 802.1D Bridging

– Up to 2.3 Mbps per SHDSL port (up to 9.2 Mbps loop bonded)
– Lower speeds supported up to 24,000 feet/7.3Km

Packaged Quantity 2 (specifications are for single item)
Device Type DSL modem
Form Factor External
Localization North America
Bus Ethernet
Connectivity Technology Wired
Max Transfer Rate 2.3 Mbps
Digital Signaling Protocol SHDSL
Protocols & Specifications ITU G.991.2 (G.shdsl)
Line Coding Format 2B1Q, TC-PAM
Features Loop bonding (inverse multiplexing)
Expansion / Connectivity
Interfaces 4 ¦ 1 x 100Base-TX - RJ-45
Compliant Standards CSA, EN 60950, EN55022, UL 1950, EN55024, CSA 22.2 No. 950, FCC Part 15
Power Device Power supply
Voltage Required AC 120 V
Dimensions & Weight
Width 8.5 in
Depth 4.8 in
Height 1.3 in
Weight 0.7 lbs
Environmental Parameters
Min Operating Temperature 32 °F
Max Operating Temperature 122 °F
Humidity Range Operating 5 - 95%
  View/Download Coupon
Service Net
  Description Price
 Service Net 1 Year Plan 1 Year EXT, Repair Coverage for Consumer Electronics 1 Year Plan $36.99  
 Service Net 2 Years Plan 2 Year EXT, Repair Coverage for Consumer Electronics 2 Years Plan $66.99  
 Service Net 3 Years Plan 3 Year EXT, Repair Coverage for Consumer Electronics 3 Years Plan $96.99  
 Service Net 4 Years Plan 4 Year EXT, Repair Coverage for Consumer Electronics 4 Years Plan $133.99  


Paradyne SHDSL 4-Port Network Extender Kit (SNE2040G-KIT1US )

Four Line Loop Bonding SHDSL Kit Includes (1) SNE2040G-P Provider Unit and (1) SNE2040G-S Subscriber Unit with North American Supply

0 Question(s) • 0 Answer(s)

Back to top

Rules and Regulations

0 Question(s) from the Community

Most Recent Reviews

No reviews have been submitted for this product. Be the first user to  submit a review .
Entrust bbb Rating Tool Twist

1940 E. Mariposa Ave. El Segundo, CA 90245 - 877.888.2678
© 1999 – 2014 eCOST