Call Us: 1-877-888-2678
 
 
Rebate Center
 
Help Desk
My Account
Exclusive Offers!
 
Follow Us:
 
 

HP Ethernet 1Gb 4-port 366M Adapter - 615729-B21


The HP 366M is a PCIe 2.1 quad-port 1Gb Ethernet mezzanine network adapter for select HP ProLiant BladeSystem c-Class Gen8 servers. Based on the bridgeless Intel I350 controller, it is the follow-on adapter to the HP NC364m.   Learn more about the product
Price:$481.99
Quantity:
Add Item
eCOST Part#: 9237287
Mfr Part#: 615729-B21
Usually Ships:
Availability:
Platform: Universal
Manufacturer:
UPC:885631274361
Customer Rating:
(0)
No Reviews

 

"List price" is the suggested retail price provided to us by our vendors. We make no representation that a substantial number of these products have been sold or offered for sale at the list price. Actual retail prices in your area may be substantially different. Since we sell products on a national basis, it is not possible to know if our merchandise is sold at list price in any particular location or at any particular time. "You Save" reflects the difference between our price and the vendor provided list price shown on our sites. Since the list price may be different than the actual retail prices in your area, you may not actually realize a savings of this amount.

Manufacturers sometimes ask that retailers not display a price if it drops below a certain amount. The "Click here to see Lowest Price" message indicates that the price of the item is so low that the manufacturer requested that it not be advertised (that is, displayed). In a brick-and-mortar store, you would probably have to ask a salesperson what the price of the product is. At eCOST, by clicking on "Click here to see Lowest Price" you are essentially asking to see the price, at which point we show it to you.

 Free Shipping
 Free Shipping
 Free Shipping
 Free Shipping on Orders Over $50 and under 30 pounds (Orders Up to 30lbs qualify. Excludes shipments to AK & HI.)
The HP 366M is a PCIe 2.1 quad-port 1Gb Ethernet mezzanine network adapter for select HP ProLiant BladeSystem c-Class Gen8 servers. Based on the bridgeless Intel I350 controller, it is the follow-on adapter to the HP NC364m.

The total aggregate throughput of 4Gbps meets the needs of customers wanting high bandwidth but not yet ready to move to 10 Gigabit Ethernet. Support for VMware NetQueue, Microsoft VMQ, and Intel VMDq meets the performance demands of consolidated virtual workloads. Other features supported on the HP 366M include RSS, PXE, checksum offload, VLAN, jumbo frames, iSCSI acceleration and iSCSI remote boot.

Features of the HP Ethernet 1Gb 4-port 366M Adapter

First quad-port 1GbE mezzanine adapter for HP BladeSystem Gen8 servers offers network port density
  • New bridgeless quad-port design with PCIe 2.1 support offers greater throughput for I/O intensive applications like virtualization, firewall and other security, network segmentation, and other bandwidth hungry applications

  • Total aggregate throughput of 8 Gbps full duplex meets the needs for customers who need high bandwidth but are not yet ready to move to 10 Gigabit Ethernet

  • Intel Integrated I/O with Data Direct I/O reduces system power, increases I/O performance, and reduces latency, while DMA Coalescing enables the adapter to remain in a low power state for a long time

  • Virtualization is optimized by support for VMware NetQueue, Microsoft VMQ, Intel VMDq, and VLAN support with eight queues per port and port partitioning

  • Advanced features like PXE boot, jumbo frames, VLAN support, and RSS increase network performance
General
Device Type Network adapter - 4 ports
Interface (Bus) Type PCI Express 2.1 x4
PCI Specification Revision PCIe 2.1
Networking
Connectivity Technology Wired
Data Link Protocol Gigabit LAN
Data Transfer Rate 1 Gbps
Features Fault tolerance, load balancing, Jumbo Frames support, PXE support, Large Send Offload (LSO)
Compliant Standards IEEE 802.3, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1as
Processor / Memory
Processor 1 x I350 - Intel
Miscellaneous
Compliant Standards FCC Class A certified, UL, UL 60950, FCC CFR47 Part 15, WEEE, RoHS
Software / System Requirements
OS Required SuSE Linux Enterprise Server, Microsoft Windows Server 2008, Microsoft Windows HPC Server 2008, Oracle Solaris 10, Red Hat Enterprise Linux 6.1, Red Hat Enterprise Linux 5.7, Citrix XenServer 6.0, VMware ESXi 4.1 update 2, VMware ESXi 5.0 update 1, VMware ESX 4.1 update 2
Environmental Parameters
Min Operating Temperature 50 °F
Max Operating Temperature 95 °F
Humidity Range Operating 10 - 90% (non-condensing)
Compatibility Information
Designed For HP ProLiant BL420c Gen8, BL460c Gen8, BL465c Gen8
close
  View/Download Coupon
 

HP Ethernet 1Gb 4-port 366M Adapter (615729-B21)

The HP 366M is a PCIe 2.1 quad-port 1Gb Ethernet mezzanine network adapter for select HP ProLiant BladeSystem c-Class Gen8 servers. Based on the bridgeless Intel I350 controller, it is the follow-on adapter to the HP NC364m.

0 Question(s) • 0 Answer(s)

Back to top

Rules and Regulations

0 Question(s) from the Community

Most Recent Reviews

No reviews have been submitted for this product. Be the first user to  submit a review .
 
Entrust bbb Rating Tool Twist

1940 E. Mariposa Ave. El Segundo, CA 90245 - 877.888.2678
© 1999 – 2014 eCOST