Call Us: 1-877-888-2678
 
 
Rebate Center
 
Help Desk
My Account
Exclusive Offers!
 
Follow Us:
 
 

Fluke Networks CableIQ Qualification Tester - CIQ-100


Sees if your existing cabling has the bandwidth to support voice, 10/100, VoIP or Gigabit Ethernet. Includes CableIQ tester.   Learn more about the product
Price:$1,160.99
Quantity:
Add Item
eCOST Part#: 460805
Mfr Part#: CIQ-100
Usually Ships:
Availability:
Platform: Universal
Manufacturer:
UPC:754082022602
Customer Rating:
(0)
No Reviews

 

"List price" is the suggested retail price provided to us by our vendors. We make no representation that a substantial number of these products have been sold or offered for sale at the list price. Actual retail prices in your area may be substantially different. Since we sell products on a national basis, it is not possible to know if our merchandise is sold at list price in any particular location or at any particular time. "You Save" reflects the difference between our price and the vendor provided list price shown on our sites. Since the list price may be different than the actual retail prices in your area, you may not actually realize a savings of this amount.

Manufacturers sometimes ask that retailers not display a price if it drops below a certain amount. The "Click here to see Lowest Price" message indicates that the price of the item is so low that the manufacturer requested that it not be advertised (that is, displayed). In a brick-and-mortar store, you would probably have to ask a salesperson what the price of the product is. At eCOST, by clicking on "Click here to see Lowest Price" you are essentially asking to see the price, at which point we show it to you.

 Free Shipping
 Free Shipping on Orders Over $50 and under 30 pounds (Orders Up to 30lbs qualify. Excludes shipments to AK & HI.)
Qualification is a new category of testers designed to meet the emerging needs of network technicians who need to upgrade to higher network speeds as well as troubleshoot connectivity problems. Qualification testers determine if an existing cabling link can or can not support certain network speeds and technologies. This differs from certification testers, which guarantee cabling installations comply with TIA/ISO performance standards and basic verification testers, which test if the cable is connected correctly.

–Qualifies - Sees if your existing cabling has the bandwidth to support voice, 10/100, VoIP or Gigabit Ethernet
• Troubleshoots - shows why existing cabling cannot support the network's bandwidth requirement (e.g. crosstalk at 11 meters)
• Discovers - detects what's at the end of any cable and displays device configuration (speed/duplex/pairing)
• Identifies unused switch ports that can be reallocated
• Graphically maps wiring configuration and shows distance to faults with Intelligent Wiremap
• Tests all copper cabling media: twisted-pair, coax, and audio cabling

Specifications:

–Cable types supported : UTP, STP, FTP, SSTP, RG6, RG59, auido and security
–Qualification autotests : 1000BASE-T, 100BASE-TX, 10BASE-T, VoIP, 1394b S100, TELCO, Wiremap only, Coax
–Supported tests: Wiremap, length, cable signal performance, digital toner, analog toner, Ethernet port detection and identification, analog telephone detection, blink port light, continuity, speaker test, cable fault finding, video signal detection.
–Wiremap: Can detect single wire faults and supports MultiMap mode with up to seven remote office identifiers. Draws proportional wire length to breaks. Detects split pairs.
–Find fault: Measures crosstalk and impedance and compares against appropriate limits based on qualification test selected. Detects location of large point sources as well as distributed sources in the cabling if they are sufficient to disqualify the application
–Results storage: Up to 250 qualification test results
–Power: Battery type: 4 AA (NEDA 15A, IEC LR6) alkaline batteries
–Battery life : 20 hours of typical use, without backlight
–Other battery types supported : 4AA photo lithium, NIHM, NICAD
–Dimensions and weight : 7in x 3.5in x 1.75in (17.8cm x 8.9cm x 4.5cm) 1.2 lb (0.55 kg)
General
Device Type Network tester
Media Copper
Features USB connectivity
Tests, Tools and Measurements Length, speed test copper cables to 1000Base-T, toning, wiremap, VoIP, port discovery
Cable Types UTP, STP, FTP, SSTP, RG6, RG59, audio, security
Software CableIQ Reporter
Included Accessories Soft case, F-connector adapter
Cables Included 1 x USB cable ¦ 2 x RJ-45 to RJ-45 patch cable
Connectors F connector, RJ-45, RJ-11
Test Standards TIA-570B
Display
Technology LCD
Features Backlight
Battery
Technology Alkaline
Included Qty 4
Required Qty 4
Run Time (Up To) 20 hour(s)
Supported Battery Form Factor AA
Dimensions & Weight
Width 7 in
Depth 3.5 in
Height 1.8 in
Weight 1.2 lbs
Test Equipment
Add   Description Price Rating
 Test Equipment Fluke Networks IntelliTone Pro 100 Probe - probe IntelliTone Pro 100 Probe - probe Manufacturer: Fluke Networks The IntelliTone Pro Toner and Probe Series from Fluke Networks is the first toner and probe to offer digital and analog signaling all in one tool. $117.99 ()
(0)
 
 Test Equipment Fluke Networks IntelliTone Pro 200 Probe - probe IntelliTone Pro 200 Probe - probe Manufacturer: Fluke Networks Fluke IntelliTone Pro 200 Probe - Probe $135.99 ()
(0)
 

close
  View/Download Coupon
 

Fluke Networks CableIQ Qualification Tester (CIQ-100 )

Sees if your existing cabling has the bandwidth to support voice, 10/100, VoIP or Gigabit Ethernet. Includes CableIQ tester.

0 Question(s) • 0 Answer(s)

Back to top

Rules and Regulations

0 Question(s) from the Community
Accessories
Fluke Networks IntelliTone Pro 100 Probe - probe
Fluke Networks
IntelliTone Pro 100 Probe - probe
$117.99 ()
(0)
Fluke Networks IntelliTone Pro 200 Probe - probe
Fluke Networks
IntelliTone Pro 200 Probe - probe
$135.99 ()
(0)

Most Recent Reviews

No reviews have been submitted for this product. Be the first user to  submit a review .
 
Entrust bbb Rating Tool Twist

1940 E. Mariposa Ave. El Segundo, CA 90245 - 877.888.2678
© 1999 – 2014 eCOST