eCOST | EMC, Emulex 4GB/s Fibre Channel PCI Express Host Bus Adapters, LPE1150-E

The Emulex LightPulse LPe1150 is a high performance 4Gb/s PCI Express x4 host bus adapter solution. The LPe1150 balances the advanced bus speeds and efficiency of PCI Express with exceptional 4Gb/s Fibre Channel performance. With unsurpassed robustness, reliability and performance, the LPe1150 provides the optimum I/O connectivity solution for a wide spectrum of server, storage and system area networks (SANs).

Major Features
– 4Gb/s Fibre Channel link with auto speed negotiation with 1Gb/s and 2Gb/s Fibre Channel SANs
– Single Fibre Channel port
– PCI Express x4
– Superior Performance
    - Full duplex 4Gb/s bandwidth per port
    - Capable of sustaining up to 100,000 I/Os per second
    - Frame level multiplexing and out of order frame reassembly
- On-board hardware context cache for superior fabric support and high transaction performance
– End-to-end data protection with hardware parity and CRC support
– HBAnyware™ provides centralized, in-depth management of HBAs anywhere in the SAN
– Enterprise AutoPilot Installer™ simplifies and accelerates the HBA installation process
– Firmware-based architecture enables HBAs to be updated with new features & functionality, maintaining investment value
– Hardware independent drivers ease management & allow driver upgrade independently of HBA firmware
– SMI-S and common HBA API support enable seamless upward integration into enterprise storage and server management solutions
– Universal boot provides multi-platform support for remote SAN boot, offering enhanced server management and reduced system costs
– Detailed, real-time event logging and tracing enables quick diagnosis of SAN problems
– RoHS Compliant (Directive 2002/95/EC) LightPulse

Specifications
– Standards:
    - ANSI Fibre Channel: FC-PH-3, FC-PI-2, FC-FS, FC-AL-2, FC-GS-4, FC-FLA, FC-PLDA, FC-TAPE, FCP-2, and RFC 2625 (IP over FC)
    - PCI Express base spec 1.0a
    - PCI Express card electromechanical spec 1.0a
    - Fibre Channel class 2 and 3
    - PHP hot plug—hot swap
– Architecture:
    - Emulex LightPulse® technology
    - 4Gb/s, 2Gb/s or 1Gb/s FC Link speeds automatically detected
    - Integrated data buffer & code space memory
– Physical Dimension:
    - Short, low profile MD2 form factor card
    - 167.64mm x 64.42mm (6.60" x 2.54")
    - standard bracket (low profile available)
– Driver Support:
    - Windows Server 2003
    - Windows 2000
    - Linux
    - NetWare

General
Device Type	Host bus adapter
Form Factor	Plug-in card - low profile
Interface (Bus) Type	PCI Express x4
PCI Specification Revision	PCIe 1.0a
Bus Voltage	3.3 V
Depth	6.6 in
Height	2.5 in
Networking
Connectivity Technology	Wired
Data Link Protocol	4Gb Fibre Channel (Short Wave)
Fibre Channel	FC-AL-2, FC-FLA, FC-FS, FC-GS-4, FC-MI, FC-PH-3, FC-PLDA, FC-Tape, FC-SP, FCP-2, FC-PI-2
Data Transfer Rate	4.24 Gbps
Max Transfer Distance	500 ft
Features	Auto-negotiation
Expansion / Connectivity
Interfaces	1 x network - 4Gb Fibre Channel (short-wave) - LC multi-mode x 2
Compatible Slots	1 x PCI Express x4
Miscellaneous
Compliant Standards	FCC Class A certified, TUV, C-Tick, BSMI, CISPR 22 Class A, VCCI Class A ITE, EN55024, EN55022 Class A, EMC, FCC Part 15, ICES-003 Class A, RoHS, UL 60950-1, EN 60950-1, CSA C22.2 No. 60950-1-03, MIC Class A
Software / System Requirements
OS Required	Novell NetWare, Linux, Microsoft Windows 2000, Microsoft Windows Server 2003
Environmental Parameters
Min Operating Temperature	32 °F
Max Operating Temperature	131 °F
Humidity Range Operating	5 - 95%

EMC Emulex 4GB/s Fibre Channel PCI Express Host Bus Adapters - LPE1150-E

EMC Emulex 4GB/s Fibre Channel PCI Express Host Bus Adapters (LPE1150-E)

Most Recent Reviews