High-Speed Wireless Access for Existing Networks!

– Standards-based POE (IEEE 802.3af) or External DC power

– RangeBooster technology for up to twice the range, reduced dead spots, and up to 35% more throughput than standard Wireless-G

– Advanced wireless security using Wi-Fi Protected Access (WPA2) with up to 256-bit encryption, and new Security Monitoring Feature gives your business the visibility and protection it needs

– Support for WMM provides improved QoS over wireless connections for better video and voice performance.

RangeBooster technology is a compatible add-on to standard Wireless-G which increases your wireless network's range up to two times, and its throughput by up to 35%. Unlike ordinary wireless technologies that are confused by signal reflections, RangeBooster uses two smart receivers at each end to detect and decode reflected signals at distances where standard technologies give up. You'll find that "dead spots" in the wireless coverage area are reduced, too.

The Advanced security features makes this solution ideal for your Business. Advanced wireless security using Wi-Fi Protected Access (WPA2 Enterprise) with up to 256-bit encryption, and the new Wireless Security Monitoring functionality gives your business the visibility and protection it needs. Used when Linksys 200-Series Wireless Adapters are present, the Wireless Security Monitoring functionality alerts you of possible wireless intruders, vulnerabilities in the wireless deployment, and visibility into Denial of Service attacks.

The Linksys WAP200 Access Point lets you connect Wireless-G (802.11g) or Wireless-B (802.11b) devices to your wired network so you can add PCs to the network with no cabling hassle. Power over Ethernet support makes it easy to install -- you can mount the Access Point anywhere, even without ready access to a power plug. With appropriate Power Over Ethernet support at the other end, you only need to run one cable to the Access Point to deliver both data and power. Of course, you can also use the included AC adapter if your installation point has power available nearby.

Moreover, the integrated QoS features provide consistent voice and video quality on both the wired and wireless networks, enabling the deployment of business qualilty VoIP and video applications.

Additional features like Multiple BSSIDs, Wireless Roaming, Auto-channel selection, and Load Balancing, make this solution ideal for your Business.


Features:

– 10BASE-T/100Base-TX Ethernet port, autosensing half/full duplex & MDI/MDI-X
– Full backwards compatibility with 802.11b
– Easy installation and configuration
– Supports WEP, WPA-PSK, WPA2-PSK, WPA-ENT, WPA2--ENT authentication (802.11i ready)
– SMA detachable dipole antennae with 1x2 MIMO to increase coverage
– Supports Power over Ethernet (PoE) or external DC power
– Supports 4 BSSID and 802.1Q VLAN to SSID mapping
– Supports SNMP and intuitive web-based interface
– WMM wireless QoS support - upgradeable to 802.11e
– Supports wireless roaming based on 802.11F (IAPP)
– Supports AP, Bridge Mode and Repeater mode
– Supports wireless security monitoring (working together with 200 series client cards)
– Supports wireless client isolation


Specifications

Standards: IEEE802.11g, IEEE802.11b, IEEE802.3, IEEE802.3u, IEEE802.3af (Power Over Ethernet), 802.1p (QoS priority), 802.1q (VLAN), 802.1X (Security Authentication), 802.11i - Ready (Security WPA2), 802.11e - Ready (Wireless QoS), 802.11F (Wireless Roaming)
Ports: 10BASE-T/100BASE-TX Ethernet, 12 VDC Power
Buttons: Reset
Cabling Type: UTP CAT 5
LEDs: Power, PoE, Wireless, Ethernet
Operating System: Linux


Setup/Config

WebUI: Built-in Web UI for Easy Browser-based Configuration (HTTP/HTTPS)


Management

SNMP Version: SNMP Version 1, 2c, 3
Event Logging: E-mail Notification / Remote Syslog
Web F/W upgrade: Firmware Upgradable Through Web-Browser
Diags: Flash, etc.: Diags: Flash, RAM, LAN, WLAN
DHCP: DHCP Client


Operating Modes

Access Point: Access Point Mode, Point-to-Point Bridge Mode, Point-to-Multipoint Bridge Mode, Repeater Mode


Wireless

Spec/Modulation: Radio and Modulation Type: 802.11b/DSSS, 11g/OFDM
Channels: Operating Channels: 11 North America, 13 Most of Europe (ETSI and Japan)
# of External Ant.: 2 (Omni-Directional) SMA detachable
Transmit Power: Transmit Power (Adjustable) @ Normal Temp Range: 11b - 18~19 dBm; 11g - 14~15 dBm
Antenna Gain in dBi: 2
Receiver Sensitivity: 11.g: 54 Mbps@ -72 dBm, 11.b: 11 Mbps@ -85 dBM


Security

WEP/WPA/WPA2: WEP 64-Bit/128-Bit, WPA-PSK, WPA2-PSK, WPA-ENT, WPA2-ENT
Access Control: Wireless Connection Control: MAC-Based
SSID Broadcast: SSID Broadcast Enable/Disable
802.1X: IEEE 802.1X support
Wireless Client Isolation: Wireless Client Devices Can Be Isolated from Each Other either within an SSID or between Two SSIDs
Wireless Security Monitor: Scan and Classify Wireless Devices in the Network

Report New Client and AP joining Network and Suspicious Network Events (Works together with 200 Business series client adapters):

    1. Intrusion Alarms (e.g., Rogue Client Detected, Spoofed MAC address)
    2. Denial of Service Alarms (e.g., Duration Attack, Association Table Full)
    3. Vulnerability Alarms (e.g., AP is not using encryption, AP is broadcasting SSID)
    4. Other Alarms (e.g., Low speed connection)


Quality of Service

QoS: 4 Queues / WMM Wireless Priority


Minimum Requirements:

– 802.11b, 802.11g Wireless Adapter With TCP/IP Protocol Installed Per PC
– Switch/Router with Power Over Ethernet (PoE) Support Or PoE Injector when used with PoE
– Web-Based Configuration Java-Enabled Web Browser