The Cisco Aironet 1130AG Series provides the ideal enterprise access point for offices and similar environments. With two high-performance radios, these access points provide simultaneous support for the 802.11a and 802.11g standards, offering 108 Mbps of capacity for your growing WLAN. Incorporating AES encryption in hardware, the Cisco Aironet 1130AG Series complies with the 802.11i security standard and is WPA2-certified, helping to assure that your network employs the strongest security available while maintaining interoperability with products from other manufacturers. Additional design features, including diversity antennas with omnidirectional coverage and an unobtrusive form factor, along with an attractive price, provide low total cost of ownership.

Features & Benefits:

– Cisco Unified Wireless Network
Extends security, scalability, reliability, ease of deployment, and manageability available in wired networks to the wireless infrastructure

– Dual 802.11a and 802.11g Radios
Provides up to 108 Mbps of capacity in a single device for industry-leading capacity and backward compatibility with legacy 802.11b clients.

– Supports 15 Nonoverlapping Channels
- Lower potential interference with neighboring access points simplifies deployment
- Fewer transmission errors deliver greater throughput

– Cisco IOS Software
Delivers enterprise-class features for connectivity, scalability, and high availability

– Lightweight Access Point Protocol (LWAPP)
- Automatically detects the best available Cisco wireless LAN controller to download appropriate policies and configuration information with no hands-on intervention.
- The Cisco Aironet 1130AG Series may be ordered with Cisco IOS Software to operate as an autonomous AP or with Lightweight Access Point Protocol (LWAPP). When the 1130AG is operating as a lightweight AP a WLAN controller is required.

– Industry-Leading Radio Design
- Provides robust signals to long distances
- Mitigates the effects of multipath signal propagation for more consistent coverage

– Variable Transmit Power Settings
- Allows access point coverage to be tuned for differing requirements
- Low-dBm setting supports closer spacing of access points in high-density deployments

– Integrated Antennas
- Complete system is deployable out of the box without external antennas
- Specifically designed to provide omnidirectional coverage for offices and similar radio frequency environments

– Hardware-Assisted AES Encryption
Provides high security without performance degradation

– IEEE 802.11i-Compliant; WPA2-Certified and WPA-Certified
Helps to ensure interoperable security with wireless LAN client devices from other manufacturers

– Low-Profile Design
- Unobtrusive design blends in to environment
- "Quiet" LED does not draw attention to it when operating normally and no action is required

– Multipurpose and Lockable Mounting Bracket
- Installs easily to walls, ceilings, and suspended ceiling railways
- Accommodates standard padlock to prevent theft

– Inline Power Support (IEEE 802.3af and Cisco Inline Power)
- Provides an interoperable alternative to AC power
- Simplifies deployment by allowing power to be supplied over the Ethernet cable
- Compatible with 802.3af-compliant power sources

Product Details:

– Device Type
Wireless access point

– Antenna
Internal integrated

– Antenna Qty
2

– Directivity
Omni-directional

– Interfaces
1 x network / power - Ethernet 10Base-T/100Base-TX - RJ-45 1 x network - Radio-Ethernet

– Compliant Standards
VCCI, EN 60950, ICES-003, IEC 60950, UL 60950, CSA 22.2 No. 60950, EN 300.328, EN 301.489.1, EN 301.489.17, FCC Part 15.247, OET 65 C, RSS-210, RSS-102, UL 2043, FCC

– Network Authentication Method
Secure Shell (SSH), MS-CHAP

– Compliant Standards
IEEE 802.11b, IEEE 802.11a, IEEE 802.3af, IEEE 802.11g, IEEE 802.1x, IEEE 802.11i, Wi-Fi CERTIFIED

– Connectivity Technology
Wireless

– Data Link Protocol
IEEE 802.11b, IEEE 802.11a, IEEE 802.11g

– Data Transfer Rate
54 Mbps

– Encryption Algorithm
LEAP, AES, 128-bit WEP, 40-bit WEP, TLS, PEAP, TTLS, TKIP, WPA, WPA2

– Features
Uplink, auto-sensing per device, BOOTP support

– Form Factor
External

– Line Coding Format
CCK, OFDM

– Max Range Indoors
450 ft

– Max Range Open Space
950 ft

– Remote Management Protocol
SNMP, Telnet, HTTP, HTTPS

– Status Indicators
Active, error, status

– Power Consumption Operational
12.2 Watt

– Power Device
Power adapter - external

– Power Over Ethernet (PoE)
Yes

– Voltage Required
AC 120/230 V ( 50/60 Hz )

– Flash Memory Installed (Max)
16 MB flash

– RAM Installed ( Max )
32 MB

Lightweight ver. No IOS. Requires wireless controller.