Call Us: 1-877-888-2678
 
 
Rebate Center
 
Help Desk
My Account
Exclusive Offers!
 
Follow Us:
 
 

Allied Telesyn AT FS232 - media converter - AT-FS232-60


When upgrading your traditional 10Mbps Ethernet network or extending your 100Mbps Fast Ethernet network, switches are required, the AT-FS232 switch provides the ideal solution.   Learn more about the product
Price:$192.99
Quantity:
Service Plan:
Add Item
eCOST Part#: 7883008
Mfr Part#: AT-FS232-60
Usually Ships:
Availability:
Platform: Universal
Manufacturer:
UPC:734646123693
Customer Rating:
(0)
No Reviews

 

"List price" is the suggested retail price provided to us by our vendors. We make no representation that a substantial number of these products have been sold or offered for sale at the list price. Actual retail prices in your area may be substantially different. Since we sell products on a national basis, it is not possible to know if our merchandise is sold at list price in any particular location or at any particular time. "You Save" reflects the difference between our price and the vendor provided list price shown on our sites. Since the list price may be different than the actual retail prices in your area, you may not actually realize a savings of this amount.

Manufacturers sometimes ask that retailers not display a price if it drops below a certain amount. The "Click here to see Lowest Price" message indicates that the price of the item is so low that the manufacturer requested that it not be advertised (that is, displayed). In a brick-and-mortar store, you would probably have to ask a salesperson what the price of the product is. At eCOST, by clicking on "Click here to see Lowest Price" you are essentially asking to see the price, at which point we show it to you.

 Free Shipping
 Free Shipping on Orders Over $50 and under 30 pounds (Orders Up to 30lbs qualify. Excludes shipments to AK & HI.)


When upgrading your traditional 10Mbps Ethernet network or extending your 100Mbps Fast Ethernet network, switches are required, the AT-FS232 switch provides the ideal solution. The AT-FS232 will connect any two copper networks - irrespective of speed, and allow any copper network to be extended over a Fast Ethernet fiber link up to distances of 100km. Many new backbone switch products now support the industry standard IEEE 802.1Q specification for VLANs (Virtual LANs), which requires extra long data packets to be sent on the network.
The AT-FS232 switch has been designed to be fully compatible with these long packets, allowing them to be used in modern networks. Switches not supporting this feature will discard these extra long packets, making them unsuitable for modern networks. The switches can be used almost anywhere due to their small physical size and external power supply. Alternatively, they can be mounted in a chassis along with Allied Telesis' media converters. This allows users to construct any mix of network conversions, with the additional option of a redundant power supply.

The Missing Link feature allows the ports on the media converter to pass the "Link" status of their connections to each other. When the media converter detects a problem with one of the ports, such as the loss of connection to a node, it shuts down the connection to the other port, thus notifying the node that the connection has been lost. The value to this type of network monitoring and fault notification is that some hubs and switches can be configured to take a specific action in the event of the loss of connection on a port. In some cases, the unit can be configured to seek a redundant path to a disconnected end-node or send out a trap to a network management station alerting the network administrator of the problem.

The Smart Missing Link mode is one step advance from the Missing Link mode. In SML mode, a downstream Link LED is forced to blink to indicate the link status of the local section is OK, but at the section where the physical link is down, the Link LED will be forced off. This special feature is useful in determining where the actual link is down and where the link is still good.
General
Device Type Media converter
Form Factor External
Networking
Connectivity Technology Wired
Cabling Type 10Base-T, 100Base-FX, 100Base-TX
Data Link Protocol Ethernet, Fast Ethernet
Data Transfer Rate 100 Mbps
MAC Address Table Size 2K entries
Max Transfer Distance 1.2 miles
Status Indicators Collision status, port duplex mode, power, link OK
Features Full duplex capability, MissingLink, auto-uplink (auto MDI/MDI-X), Smart Missing Link (SML), store and forward
Compliant Standards IEEE 802.1Q
Expansion / Connectivity
Interfaces 1 x Ethernet 10Base-T/100Base-TX - RJ-45 female ¦ 1 x Ethernet 100Base-FX - SC multi-mode female x 2
Miscellaneous
Compliant Standards FCC Class A certified, CSA, UL, TUV, cUL
Environmental Standards
ENERGY STAR Qualified Yes
Power
Power Device External power adapter
Dimensions & Weight
Width 4.1 in
Depth 3.7 in
Height 1 in
Weight 11.2 oz
Environmental Parameters
Min Operating Temperature 32 °F
Max Operating Temperature 104 °F
Humidity Range Operating 5 - 95%
close
  View/Download Coupon
Service Net
  Description Price
 Service Net 1 Year Plan 1 Year Service Net Replacement Coverage (100 - 199.99), EXT 1 Year Plan $20.00  
 Service Net 2 Years Plan 2 Year Service Net Replacement Coverage (100 - 199.99), EXT 2 Years Plan $37.50  

 

Allied Telesyn AT FS232 - media converter (AT-FS232-60)

When upgrading your traditional 10Mbps Ethernet network or extending your 100Mbps Fast Ethernet network, switches are required, the AT-FS232 switch provides the ideal solution.

0 Question(s) • 0 Answer(s)

Back to top

Rules and Regulations

0 Question(s) from the Community

Most Recent Reviews

No reviews have been submitted for this product. Be the first user to  submit a review .
 
Entrust bbb Rating Tool Twist

1940 E. Mariposa Ave. El Segundo, CA 90245 - 877.888.2678
© 1999 – 2014 eCOST