Supermicro's 3010 chipset motherboards support Intel Xeon 3200/3000 Series processors, Core 2 Duo, Pentium D, Pentium 4 Extreme Edition (64-bit), Pentium 4, and Celeron D processors. These products are well-suited for entry-level server platforms and cost-effective HPC clusters for high performance personal super-computing. The 3010 Chipset offers an expanded flexible I/O for PCI-e and PCI-X support.
Specifications:
Physical Stats
• Form Factor: ATX
• Dimensions:12" x 9.6", (30.5cm x 24.4 cm)
CPU
• Single LGA775 ZIF Socket
• Supports a Quad-Core Intel Xeon 3200 series processor
• Supports a Dual-Core Intel Xeon 3000 series processor
• Supports a Quad-Core Intel Core2 Extreme series processor
• Supports an Intel Core2 Quad series processor
• Supports an Intel Core2 Duo series processor
• Supports an Intel Pentium processor E2000 series
• Supports a Dual-Core Intel Pentium D processor
• Supports an Intel Pentium Extreme Edition processor
• Supports an Intel Pentium 4 processor
• Supports an Intel Celeron processor E1000 series
• Supports an Intel Celeron processor 400 series
• NOTE: This board DOES NOT support Q9000, E8000, E7000 or E5000 series processor
System Memory
• Memory Capacity
- Four 240-pin DIMM sockets
- Supports up to 8 GB of memory (Single / Dual Channel)
• Memory Type: DDR2 667/533MHz unbuffered, ECC / non-ECC SDRAM, 240-pin gold-plated DIMMs
• DIMM Sizes: 256 MB, 512 MB, 1 GB, 2GB
• Memory Voltage: Memory Voltage
On-Board Devices
• Chipset
- Intel 3010 (Mukilteo-2P) chipset
- ICH7R + PXH + Intel 82573V + Intel 82573L
• Serial ATA
- Intel ICH7R SATA2 (3 Gbps) controller built-in
- Intel: RAID 0, 1, 5, 10 support (Windows Only)
- Adaptec: RAID 0 (Two, three, four drives only), RAID 1 (Two hard drives only)
• IPMI
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN & optional KVM-over-LAN support
- Supermicro Intelligement Management
- (Optional: AOC-SIM1U+)
- NOTE: Must use dedicated LAN for IPMI function
• Network Controllers
- 2x Single-port Gigabit PCI-Express Ethernet Controllers
- Intel 82573V
- Supports 10BASE-T, 100BASE-T, 1000BASE-T, RJ45 output
• VGA: On-board ATI ES1000 (16MB) graphics
• Super I/O: Winbond 83627HG chip
• Clock Generator: CK410
Input / Output
• Serial ATA
- Four Serial ATA ports (3 Gbps performance)
- Four SATA hard drives supported
• IDE
- One EIDE channel supports up to two UDMA IDE devices
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
• Floppy: 1 Floppy controller; 1.44 MB
• LAN: 2x RJ45 LAN ports
• USB
- Up to 4x USB 2.0 / 1.1 compliant ports
- 2 rear ports
- 1 internal header for 2 ports
• VGA: 1x VGA port
• Keyboard / Mouse: PS/2 keyboard and mouse ports
• Serial Ports
- 1x Fast UART 16550 serial port
- 1x internal header
Chassis ( Optimized for PDSME+ )
• 2U
- CSE-823T-R500LP
- CSE-823T-550LP
- CSE-823i-550LP
• Tower / 4U Rackmount: CSE-742i-450
- CSE-733T-645
- CSE-733T-450
- CSE-733i-645
- CSE-733i-450
• Important Note: For a general system, a 400W (minimum) ATX12V power supply [8-pin +12V AND 24-pin is recommended to assure system stability].
Expansion Slots
• PCI-Express
- 1 (x4) PCI-e slot
- 1 (x8) PCI-e slot
• PCI - X
- 2x 64-bit 133MHz PCI-X (3.3V) slots
- 2x 64-bit 100MHz PCI-X (3.3V) slots
BIOS Features
• Plug and Play (PnP)
• DMI 2.3 support
• PCI 2.2
• ACPI 1.0
• SMBIOS 2.3
• USB Keyboard support
Software
• Optional IPMI (Intelligent Platform Management Interface) 2.0
• Super Doctor III
• Watch Dog
• NMI
Power Configurations
• ACPI Power Management
• Main Switch Override Mechanism
• Wake-On-Ring (WOR) header
• Wake-On-LAN (WOL) header
• Keyboard Wakeup from Soft-Off
• CPU Fan auto-off in sleep mode
• Power-on mode control for AC power loss recovery
• Internal/External modem remote ring-on
• Suspend to RAM (STR)
